xBACP

The Attempt…

  • Home
  • About

xBACP

Month: January 2020

Configuring the Beaglebone Black GPIO Pins (Permanently)

Posted: January 25, 2020 Under: Hardware By B No Comments

The majority of the 46 GPIO pins on the Beaglebone Black have different modes of operation. For example, pin 24 on header P9 can operate as a simple GPIO, a Controller Area Network (CAN) port, among others. If one is using a Debian-based Linux OS image from elinux.org, the system comes with a helper script … Continue reading "Configuring the Beaglebone Black GPIO Pins (Permanently)"

Read More

Recent Posts

  • Adding an External Real-time Clock Module For the Beaglebone Black
  • Upgrading to a New System Image for the Beaglebone Black in Early 2023
  • Using GDB with GDB Server within Visual Studio Code
  • Using GDB and GDB Server with the Beaglebone Black
  • Be Careful of the Power given by the Linux Command Line

Recent Comments

    Archives

    • March 2023
    • February 2023
    • January 2022
    • October 2021
    • May 2020
    • January 2020
    • October 2019
    • September 2019
    • February 2019
    • November 2017
    • October 2017
    • September 2017
    • May 2017
    • January 2017
    • December 2016
    • November 2016
    • October 2016
    • August 2016
    • July 2016
    • June 2016
    • March 2016

    Categories

    • Advice, Wisdom, and Other Good Stuff
    • Announcement
    • Hardware
    • Opinion
    • Software
    • Uncategorized

    Meta

    • Log in
    • Entries feed
    • Comments feed
    • WordPress.org
    • Home
    • About

    Copyright xBACP 2023